+ 91 09820998248
Fluidtherm, Thermic fluid heater, consists of two concentric coils in which inner coil acts as a radiation zone and outer coil act as a convection zone.
Flue gas velocity is generally higher between the 2 coils and between the coil and the outer shell, so higher the velocity higher will be the convective heat transfer between the flue gas and fluid.
Thermic fluid heaters can be made either 3 pass or 4 pass depending on the design of thermic fluid heater and the type of fuels to be burnt. The efficiency of the heater increases with an increase in the number of passes.
The maximum temperature of 350℃ of thermal fluid can be achieved in a Fluidtherm although the higher temperature of the thermal fluid can be achieved provided the temperature of fluid does not exceed the auto-ignition temperature. Thermic Fluid Heater also consists of a deaerator and expansion tank.
The density of fluid decreases with increase in the temperature of fluid so a tank is generally installed in a process to help accommodate the extra volume of fluid which is increased due to increase in the fluid temperature. For every 100℃ rise in the fluid temperature, the volume of fluid increases by 7% so expansion tank is added to take care of that extra volume.
Deaerator tank is combined with the expansion tank and is generally used to vent out air from the fluid which acts as resistance in transferring heat to the fluid. Industrial Thermic Fluid Heater Fuels
Fluidtherm, Thermic heating system made by used to burn the different type of fuels such as:-
Fluidtherm is available in capacities from 1 Lac Kcal/hr to 10 Lac Kcal/hr
Our Thermic Fluid Heaters and Steam Boiler has best Quality of inputs like Seamless Pipes for coil, High Tensile Fasteners, SS Reflector Shell, and other components are bought from best of the brands like Siemens, Bharat Bijlee, Finolex, English Electric, fenner, Indofoss. Thereby making these units very strong and long lasting.