• Phone +91 9820998248

  • Mobile +91 9987187747

  • Email Id mithai@mithaimachine.com

Fluidtherm Construction Design 

Fluidtherm Construction Design  

Fluidtherm Construction Design

Fluidtherm, Thermic fluid heater, consists of two concentric coils in which inner coil acts as a radiation zone and outer coil act as a convection zone.

Flue gas velocity is generally higher between the 2 coils and between the coil and the outer shell, so higher the velocity higher will be the convective heat transfer between the flue gas and fluid.

Thermic fluid heaters can be made either 3 pass or 4 pass depending on the design of thermic fluid heater and the type of fuels to be burnt. The efficiency of the heater increases with an increase in the number of passes.

Working Process of Thermic Fluid Heaters :

The maximum temperature of 350℃ of thermal fluid can be achieved in a Fluidtherm although the higher temperature of the thermal fluid can be achieved provided the temperature of fluid does not exceed the auto-ignition temperature. Thermic Fluid Heater also consists of a deaerator and expansion tank.

The density of fluid decreases with increase in the temperature of fluid so a tank is generally installed in a process to help accommodate the extra volume of fluid which is increased due to increase in the fluid temperature. For every 100℃ rise in the fluid temperature, the volume of fluid increases by 7% so expansion tank is added to take care of that extra volume.

Deaerator tank is combined with the expansion tank and is generally used to vent out air from the fluid which acts as resistance in transferring heat to the fluid. Industrial Thermic Fluid Heater Fuels

Fluidtherm, Thermic heating system made by used to burn the different type of fuels such as:-

  • Solid Fuels : Wood, Coal, Petcoke, Rice husk, etc.
  • Liquid Fuels : Light Diesel Oils, Heavy Oils, etc.
  • Gaseous Fuels : Natural Gas, Liquefied Petroleum Gas, etc.
  • Advantages of Thermic Fluid Heaters :

  • High Capacity Heating System
  • Fully automatic unit – Maintains the desired temperature of the thermic fluid
  • High System Efficiency – Reduced operating cost.
  • Best applicable for High-Temperature Heating
  • Can attain temperatures upto 300 o C
  • Minimum site work and ease of installation
  • Can operate on the variety of fuels as per local availability
  • Failsafe design and dependable safety instruments
  • Rugged design and superior construction
  • High flow rate ensures the higher life of thermic fluid and heater coil
  • Backed by prompt and efficient after sales service
  • Deaerator/Expansion Tank Integral Arrangement type Fluidtherm Capacity
  • Fluidtherm is available in capacities from 1 Lac Kcal/hr to 10 Lac Kcal/hr

    Project Installation Drawing For Centralised Snacks Frying System :
    Design & Safety :
  • Heat Transfer coil made out of Seamless Pipe Sch-40
  • Minimum Delta 'T' Across the Heating Coil
  • Robust Design offers trouble free working
  • Smokeless combustion
  • Low Flow Alarm & safety
  • Noise free working
  • Quality :

    Our Thermic Fluid Heaters and Steam Boiler has best Quality of inputs like Seamless Pipes for coil, High Tensile Fasteners, SS Reflector Shell, and other components are bought from best of the brands like Siemens, Bharat Bijlee, Finolex, English Electric, fenner, Indofoss. Thereby making these units very strong and long lasting.

    Call Back
    Request a call back